Advertisement
LIMITED 10 YEAR WARRANTY
We will repair or replace any Pro-Tech Sno
Pusher® proven to be defective in materials or
workmanship for ten years after the purchase
date, in accordance with the following terms and
conditions:
1. Pro-Tech reserves the right to determine
whether a unit will be repaired or
replaced.
2. Transfer of ownership to any party other
than those mentioned on the original,
returned warranty card or online
registration will completely void this
warranty.
3. All shipping and handling charges for
returned units must be prepaid by the
owner and received at the Pro-Tech
facility FOB.
4. If the warranty claim can be diagnosed
from photographs clearly showing the
problem area and/or details of
mechanical failure, the physical return
along with additional shipping and
handling charges may be avoided. (Note:
We reserve the right to have a factory
representative evaluate any problem(s) in
the field.)
Pro-Tech makes no other warranty of any kind,
either expressed or implied, including warranties
pertaining to merchantability and fitness for a
particular purpose.
This warranty is intended to provide you with
specific rights, you may also have other rights
which vary both internationally and domestically,
as well as from state to state.
Warranty Coverage Procedure
1. Call Pro-Tech directly to discuss product
information:
Serial #, Purchase Date, Proof of
Purchase, Product Registration;
product registered with Pro-Tech
2. Describe the nature of the warranty
claim.
Exceptions to Warranty
PRODUCT REGISTRATION
In order for your new Sno Pusher to be covered
under warranty you must register it with Pro-
Tech. To register:
Pro‐Tech Manufacturing and Distribution, Inc.
711 West Ave ▪ Rochester, New York 14611
888‐787‐4766
www.snopusher.com
3. Provide photographs illustrating the
failure.
4. Pro-Tech will determine if failure falls
within the 10-year warranty. If it does,
Pro-Tech will offer corrective options. If it
does not, Pro-Tech will offer repair and
cost options.
1. Any wear associated with sacrificial parts
such as but not limited to:
Wear Shoes, Hardware, Cutting
Edge, Coupler Mounting Angles, and
connection points.
Any additionally purchased quick
coupler will have a limited (1) one-
year warranty.
2. Any damage occurring as a result of:
Misuse, Negligence, Accidental
Impact
3. Any non-factory repair or alteration
deemed detrimental to the functionality of
the Sno Pusher upon inspection by a
Pro-Tech engineer will void all warranties
specific or implied.
THE USE OF ANY NON-PRO-TECH
REPLACEMENT PARTS, SUCH AS
CUTTING EDGES OR WEAR SHOES,
WILL VOID ALL WARRANTIES.
4. Pro-Tech will not be held liable for any
personal damage that occurs as a result
of use. This includes, but is not limited to:
Injury, Death, Loss of Use, Income or
Profit Loss, Property Loss/Damage
1.
Please visit
www.protechcorp.com
register your unit online.
to
Advertisement
