MAINTENANCE
9 LUBRICATION
The provided lubrication intervals are valid when the crane operates with a normal load under nor-
mal operating conditions. Shorten the lubrication interval if the crane is heavily loaded or when the
working conditions are unfavorable, such as with sand, dust, mud, etc.
9.1
LUBRICATION TARGETS
Use molybdenum-rich grease in joint bearings and in the slide
bearings of the booms (~ 2%). in other locations general grease is
suitable.
Shorten the lubrication interval, where the working conditions are
particularly unfavorable, for example. dusty.
62