Notifications & Error Codes; Troubleshooting - Warmup 6iE mini User Manual

Notifications & Error codes
Date and time needs to
Open window function
Temporary override
Holiday mode enabled.
(Configured in MyHeating
Frost protect enabled.
(Configured in MyHeating

Troubleshooting

Display is blank
---
2
Heating is coming
on earlier than
programmed times
WiFi Error Symbol
!
Clock Icon
be set.
triggered.
enabled
App)
App)
Power
Control
(5 & 6) /
Interal Air
sensor error
Limit Sensor
Error (6 & 7)
Adaptive
learning
(Early start)
On
WiFi not
setup
WiFi
disconnected
Time and
Date not set
Heating switched OFF
2
Sensor P2 (6 & 7) error
Sensor P1 (5 & 6) not
- - -
connected / damaged or
Internal air sensor fault
!
(Electrician Required) Electrician required
to verify power is going to the 6iE mini and
that it is correctly wired.
1. Please see Table 1.0 and ensure you have
selected the correct thermostat application.
2. (Electrician Required) Electrician
required to verify that the floor sensor
has been wired correctly. If it is correctly
wired the electrician will need to check the
resistance of the floor sensor using a multi
meter. For temperatures between 20°C
- 30°C the resistance of the floor sensor
should measure between 8K ohms and
12K ohms.
If the electrician finds a fault, and the 6iE
mini is in the room to be heated then it can
be set into "Air Mode".
To set into "Air Mode", see Table 1.0
Thermostat application.
---
If " " still remains when set into air mode
the thermostat will have to be replaced.
Adaptive learning (Early start) will use the
historic heating/cooling rates for the time
of day, historic external temperatures and
the forecast external temperatures, to work
out the heating start time in order to reach
the comfort time at the start of the comfort
period. It will only work in Program Mode.
1. Download and open the MyHeating App
2. Remove thermostat from the wall
3. Scan QR code on the back of the display
4. Place thermostat back on the wall and
power-up
5. Thermostat will be in pairing mode for
1 minute. App should automatically
connect to phone
6. Follow instructions in App
Follow the step above to try and to
re-connect to the WiFi Network.
If the 6iE mini still fails to connect, see WiFi
Troubleshooting.
Connect the 6iE mini to a WiFi network or
alternatively set the time and date from the
settings menu.
15
Display locked
WiFi not setup