Subscribe to Our Youtube Channel
Related Manuals for Defy DHD406A
Summary of Contents for Defy DHD406A
- Page 1 DHD406A 600 TC VITROCERAMIC HOB Page 1 of 24 Cooking Instruction manual Part number: 073516...
- Page 2 Introduction Important safety instruction Electrical safety Product safety Prevention against possible fire risk General information Installation 13 Preparation 13 How to use the hob 15 Controls 21 Maintenance and care 22 Troubleshooting 23 Branches 24 Warranty Record in the space below the listed information for future reference. The serial number may be found on the label attached to the hob base.
- Page 3 Introduction Congratulations on the purchase of this quality appliance. We trust that you will enjoy many years of trouble free use. Please read these instructions carefully before using the appliance. This book will provide you with information on how to operate and care for your appliance in order that you gain the maximum benefit from it.
-
Page 4: Product Safety Instructions
Important safety instructions Do not use the appliance for • heating closed tins and glass This section contains safety jars. The pressure that would instructions that will help you avoid build up in the tin/jar may cause risk of injury and damage. All it to burst. - Page 5 Do not leave hot fat or oil • Electrical safety • unattended. If overheating If the product has a failure, it occurs, these could catch fire. should not be operated unless it Do not use or store is repaired by an Authorised •...
- Page 6 WARNING: Unattended The appliance must be installed cooking on a hob with fat or oil so that it can be completely can be dangerous and may disconnected from the mains result in fire. NEVER try to supply. The separation must be extinguish a fire with water, but provided by a switch built into the switch off the appliance and...
-
Page 7: Intended Use
• WARNING: Use only hob Safety for children • WARNING: Accessible parts guards designed by the may become hot during use. manufacturer of the cooking Young children should be kept appliance or indicated by the away. manufacturer of the appliance in •... - Page 8 General information Single-circuit cooking plate Vitroceramic surface Assembly clamp Base cover Technical specifications Voltage / frequency 220-240 V ~ 50/60 Hz Total power consumption 6000 W Cable type / section min.H05V2V2 5 x 1,5 mm / 3 x 2,5 mm External dimensions (height / width / depth) 55 mm/650 mm/510 mm Installation dimensions (width / depth)
-
Page 9: Installation
Installation Surfaces, synthetic laminates and adhesives used must be heat resistant (100 °C Product must be installed by a qualified minimum). person in accordance with the regulations in The worktop must be aligned and fixed force. The manufacturer shall not be held horizontally. -
Page 10: Installation And Connection
Installation and connection • The product must be installed in accordance with all local gas and electrical regulations. Do not install the hob on places with sharp edges or corners. There is the risk of breakage to the glass ceramic surface! Electrical connection Connect the product to a grounded outlet/ line protected by a miniature circuit breaker... - Page 11 1. If a power cable is not supplied The product must be connected together with your product, a power to the mains supply only by an cable with a minimum requirement as authorised and qualified person. stated in the Technical specifications table The product's warranty period (Technical specifications, page ) in starts only after correct...
- Page 12 Power cable must not be longer than Rear view (connection holes) 2 m because of safety reasons. Location of the connection holes shown in the below figure are Installing the product schematic,may vary depending on 1. Turning the hob upside down, place it on the product model.
- Page 13 reparation How to use the hob Tips for saving energy General information about cooking The following information will help you to use Never fill the pan with oil more than your appliance in an ecological way, and to one third of it. Do not leave the hob save energy: unattended when heating oil.
- Page 14 Tips about glass ceramic hobs Do not allow any object to drop • Glass ceramic surface is heatproof and is on the hob. Even small objects not affected by big temperature such as a saltshaker may differences. damage the hob. •...
- Page 15 Controls Control panel SpeciÞca ons Always keep the control panels clean and dry. Humidity and dirt Main key - ON/OFF key can cause problems in functions. Keylock (*) If your hob is equipped with a timer. Temperature setting/Increasing timer Temperature setting/Decreasing timer If your hob is equipped with these ** Dual/Triple cooking zone selection...
- Page 16 Booster Selecting the cooking zones This function facilitates cooking. When Booster is activated, the cooking will operate 1. Turn on the hob. at maximum power for a certain period of 2. Touch one of the cooking zone selection time (see, Table-1). Booster time depends controls to turn on the desired cooking on the selected temperature level.
- Page 17 on all displays. Dual/triplet cooking zone and Turning o the Booster func on: the LEDs connected to the timer will be Touch " " key until temperature level deactivated. Furthermore, when the time is decreases "0" to disable the Booster over, an audible alarm will sound.
- Page 18 Disabling the Child Lock: Then, " " LED will flash and all cooking You can disable the child lock as you have zones will be locked. activated it. Cooking zones, can only be locked in the 1. Touch main key " "...
- Page 19 » When the time is over, an audible alarm " " LEDs that illuminate continuously on will sound. Touch any key on the touch the timer display indicate the timer that is control panel to silence the audible alarm. currently counting down. Cooking zone mer: You can display the values set for cooking The cooking zone timers can only be set...
- Page 20 Operation time constraints When power restores after a The hob control is equipped with an power failure or your Hob is operation time limit. When one or more switched off if the residual heat of cooking zones are left on unintentionally, the the relevant cooking zone was cooking zone will automatically be above 60°C before the failure,...
-
Page 21: Maintenance And Care
Maintenance and care • Clean with a soft soapy cloth and liquid (non-scratching) detergent suitable for inox General cleaning information surfaces, taking care to wipe in one direction. General warnings • Remove lime, oil, starch, milk and protein • Wait for the product to cool before cleaning stains on the inox-stainless and glass the product. -
Page 22: Troubleshooting
Troubleshooting Sensor Calibration and Error Messages When the supply power is applied, hob Product emits metal noises while heating control system performs calibration and cooling. depending on the sensor, glass and ambient conditions. • When the metal parts are heated, they may expand and cause noise. - Page 23 P.O. Box 33681 50 Monument Road Lusaka, 10101, Zambia Oranjesig Tel: +260 0211 242332/3 Bloemfontein Fax: +260 0211 242933 Bloemfontein.Service@defy.co.za sgiservicecentre@microlink.zm CAPE TOWN NAMIBIA: ATLANTIC DISTRIBUTORS (PTY) 5A Marconi Rd. Montague Gardens, 7441 CapeTown.Service@defy.co.za 10 Tienie Louw Street, Northern Industrial Area P.O.
-
Page 24: Warranty
Warranty This certificate is issued by DEFY APPLIANCES (PTY) LTD manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
Need help?
Do you have a question about the DHD406A and is the answer not in the manual?
Questions and answers