Page 1
DHD394 600TC TOUCH CONTOL CERAN HOB Users Manual Record in the space below the listed information for future reference. SERIAL NUMBER………………………………………………………………………………….. DATE OF PURCHASE……………………………………………………………………………... PURCHASED FROM……………………………………………………………………………….. …………………………………………………………………………………………………………. The manufacturer strives for continuous improvement. For this reason, the text and illustrations in this manual are subject to change without notice.
Page 2
7. Error codes. children. 7. Problem check. Aperture size 7. Owner’s responsibility. 8. Defy Service Centres. 8. Warranty. 560 mm Introduction Congratulations on the purchase of this quality appliance. We trust that you will enjoy many years of trouble free use.
Page 3
Important safety instructions This section contains safety Never wash down the appliance instructions that will help you avoid with water! There is the risk of risk of injury and damage. All electric shock! warranties will become void if you Never use the appliance when do not follow these instructions.
Page 4
The appliance may be hot when it VERY IMPORTANT SAFETY is in use. Never touch the hot INSTRUCTION cooking zones. Safety installation for hob with Make sure that the hob controls control panel are switched off after every use. A removable horizontal board Use a deep pan, large enough to must be fitted below the hob and cover the appropriate cooking...
Installation Installation is the buyer’s responsibility. The manufacturer Connection to the power supply must be carried out accepts no liability for this service. Any action that the by a licensed electrician, who will ensure that the hob is manufacturer has to take as a result of an erroneous correctly connected and safely earthed.
Clean the hob with a nylon pad and a suitable smooth er that the hob surface is still too hot to touch. top cleaning solution, which is available from all Defy Service Centres. Remove calcium stains (yellow stains) Fast deactivation. Press both + and — (C and D)
CENTRE AND SPECIFY THE ERROR CODE U400 Secondary voltage of the power unit is too high. 1 CONTACT YOUR DEFY SERVICE Control unit switches off after one second and CENTRE AND SPECIFY THE ERROR permanent tone is emitted. CODE...
5. The Company shall not be responsible for transportation or other costs other than those incurred within the provisions of Point 1 of this Certificate. 6. For warranties in the Republic of South Africa and Sub-Saharan Africa, please contact your nearest Defy office. Please refer to the respective South African service agents and Sub-Saharan Africa service agents above.
Need help?
Do you have a question about the 600TC and is the answer not in the manual?
Questions and answers