Appendix A: Resetting The System Password Or The Ip Address - D-Link DI-707P User Manual

Appendix A: Resetting the System Password or the
When you forget the system password or the IP address of the DI-707P, you will
need to reset them.
Use a null modem cable (an RS-232 cable) to connect your computer and the
DI-707P using the serial ports of both machines (the com port on the DI-707P is a
serial port.)
After you have made the connection, launch a terminal program, such as the
Hyper Terminal of MS Windows 95. The connection parameters should be set
to 19200 8-N-1. Reboot the DI-707P. When the M1 indicator starts flashing
regularly, you can press the " Enter" key of the keyboard several times, there
should be some messages and a console prompt ">" will appear.
You may reset the IP address and the system password of the DI-707P. Please
remember to execute the SR command to save the changes you have made. For
example,
IP 192.168.0.1
PW admin
SR
IP Address
-27-