Network Settings - D-Link DIR-412 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address: Enter the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Apply, you will
need to enter the new IP address in your browser to get
back into the configuration utility.
Default Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Device Name: Enter the Device name (set to "DIR-412" by default).
Local Domain Name: Enter the Domain name (Optional).
Enable DNS Relay: Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your computers
will use the router for a DNS server.
D-Link DIR-412 User Manual

Network Settings

39