L2Tp (Username/Password) - D-Link DIR-412 User Manual

Section 3 - Configuration
Choose L2TP (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses an L2TP connection.
Your ISP will provide you with a username and password. This option is typically used for DSL services.
Address Mode:
Select Static IP if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic IP.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static
IP only).
L2TP Subnet
Enter the Subnet Mask supplied by your ISP (Static
Mask:
L2TP only).
L2TP Gateway
Enter the Gateway IP address provided by your ISP
IP Address:
(Static L2TP only).
L2TP Server IP
Enter the Server IP address provided by your ISP
Address:
(optional).
User Name:
Enter your L2TP user name.
Password:
Enter your L2TP password and then retype the
password in the next box.
Reconnect
Select either Always-on, On-Demand, or Manual.
Mode:
D-Link DIR-412 User Manual
Manual Configuration (WAN Mode)

L2TP (Username/Password)

30