Table of Contents
Advertisement
IPoA Account Configuration
IPoA connections require static global IP settings. Your ISP should supply this information. The glbal IP
configuration settings are summarized in the table below.
The IPoA Account Configuration menu presents the following user IP settings:
Connection Type
Encapsulation
IP Address
Netmask
Gateway
When you have entered or changed the Account Configuration information according to the instructions of your
ISP or ADSL service provider, click the OK button. You will be prompted to continue making configuration
changes to the Modem or to save the changes you just made and restart the Modem now. Select the appropriate
option and click OK.
PPP Information
PPP Information is read-only. The IP settings information listed here are the IP settings that identify your
account and are used to route data traffic to and from the Modem.
DSL-300 ADSL Modem User's Guide
Figure 11. IPoA Account Configuration
Use this drop-down menu to change connection type used for your ADSL
service. PPPoE is the default connection type used for the Modem.
Choose the capsulation method from the drop-down menu as instructed by
your ISP.
Type in the global IP address given to you by your ISP.
Type in the Netmask used for you account (given to you by your ISP).
Type in the Gateway IP address used to connect to IP addresses outside
your group of IP addresses (given to you by your ISP)..
Type in the DNS server IP address given to you by your ISP. This is used
DNS
to match web sire addresses to their actual global IP addresses.
23
Advertisement
Table of Contents
