System Setting (Vpi/Vci Settings) - D-Link DSL-300G+ User Manual

System Setting (VPI/VCI Settings)

IMPORTANT! DO NOT change any of the settings in the System Setting menus unless
you have been instructed by you ISP or ADSL service provider to change the VPI, VCI
or AC Name information.
If you have been told to change the VPI or VCI settings or if you have been given an AC Name, use the System
Setting menu to enter the new information.
VPI/VCI To change the VPI/VCI values, type in the numbers given to you by your ISP or ADSL service
provider in the VPI/VCI spaces provided. The first (left hand) space is for the VPI value. The
second (right hand) space is for the VCI value. These numbers are used to define a path on the
ATM network used by your ISP or ADSL service provider.
AC Name Some PPPoE connections may require only If you are given an AC Name for you account,
type in the characters exactly as given to you by your ISP or ADSL service provider. This
(PPPoE only)
character string functions in way similar to a user name and is used to authenticate your
account.
1. When you have entered the System Settings information click the OK button. The save changes
message appears.
2. Click OK again to save the changes to flash memory.
DSL-300 ADSL Modem User's Guide
Figure 9. System Setting Menu (PPPoE)
21