Footswitch Led State Reference - TC Electronic Ditto X2 Looper English Manual

Footswitch LED
state reference
Use this section as a reference when you are not
sure what the current LED status means.
LOOP footswitch LED...
Off Device disconnected or no
loop in memory
Blinking green Loop in memory, playback/
recording stopped
Green Loop running (LED will blink
shortly when LOOP end is
reached)
Red Loop recording
Blinking red Loop currently being erased
or converted
FX footswitch LED...
Red Reverse effect active
Green Half speed effect active
Blinking red & Reverse and Half speed ef-
green fects active
Ditto X2 Looper English Manual

Footswitch LED state reference

21