Power / Switching The Effect On And Off; Footswitch - TC Electronic Flashback Mini Delay User Manual

Flashback Mini Delay
Flashback Mini Delay – Manual (2014-05-26)
Power / Switching the
effect on and off
Power input
To power up your pedal, connect a power supply
to its power input socket.
The power input socket of your TC Electronic
effect pedal is a standard 5.5 / 2.1 mm DC plug
(centre = negative).
Your TC Electronic effect pedal requires a 9 V
power supply providing 100 mA or more (not
supplied).
To minimize hum, use a power supply with iso-
lated outputs.

Footswitch

– To turn the effect on, tap the footswitch.
– To turn the effect off, tap the footswitch again.
Inputs, outputs and controls
Using the footswitch for tempo tapping
Hold down the footswitch for tempo tapping.
Of course, the delay time can be set using the
DELAY knob. However, for timing the delay re-
peats to the tempo of the song you are playing,
you can also tap in a the tempo via audio.
To set the tempo:
– Hold down the footswitch.
– With the footswitch held down, play steady
short 1/4 notes on your instrument.
Please note that the output is always muted
during audio tapping.
– Release the switch again.
16