Advertisement
Jumpers, Connectors, & Headers:
• 4-Pin Power Connector: DCIN_PWR
NOTE: 1. If AC adapter is connected with "DC_PWR" connector at rear IO, then this 4-pin connector
doesn't need any power connection.
2. A 4-pin to AC adapter barrel connector cable is required when utilizing this header as the
only power source to ECM-3455J board.
3.
9V~36V, 6A Max. 19V recommended.
• ATX/ AT Mode Select: AT_ATX
• Front Panel Connector: F_PANEL
Advertisement
