Table of Contents
Advertisement
en Basic operation
While taking into consideration the cooking mode
3.
and the quantity of food as well as using the picture
below as an aid, turn the selector anti-clockwise to a
suitable position.
a The function display lights up.
10.5 Recommended cooking settings
You can find an overview of different foods with appro-
priate heat settings here.
The cooking time will vary depending on the type,
weight, thickness and quality of the food. Select the
right cookware size for each hotplate. The diameter of
the cookware base should be the same size as the hot-
plate.
Power level
1-2
2-3
4-5
4-5
5
2-3-4-5
6-7-8
9
11 Basic operation
11.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
11.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
11.3 Types of heating and temperature
Use the function selector to set the type of heating.
1.
18
10.4 Switching off the electric hotplate
Residual heat is present after the electric hotplate is
switched off.
▶
a The function display goes out.
Note:
In these cases, increase the output:
¡ When cooking with larger quantities of liquid,
¡ When preparing larger quantities,
¡ When using cookware without a lid.
Cooking method
Melting
Boiling
Boiling
Searing
Steaming
Warming up and keeping the temper-
ature of the food
Frying
Boiling and frying
2.
a The appliance starts heating after a few seconds.
3.
Tip: The most suitable type of heating for your food
can be found in the description of the types of heating.
Changing the type of heating
You can change the type of heating at any time.
▶
Changing the temperature
You can change the temperature at any time.
▶
Turn the selector to the 0 position.
Examples
Butter, chocolate
Rice, béchamel sauce and vegetable
ragout
Potatoes, pasta, vegetables
Ragout, roast joint
Fish
Ready meals
Fillet, steak, börek
Meat
Use the temperature selector to set the temperature.
When the dish is ready, switch off the appliance.
Use the function selector to set the required type of
heating.
Turn the temperature selector to set the desired
temperature.
Advertisement
Table of Contents
