New Holland T8.295 Service Manual page 58

42. Remove the six socket head bolts (1) and three back-
ing plates (2) securing the drive shaft assembly to the
engine drive pulley. Disengage the drive from the pul-
ley.
43. Remove the nuts and washers (1) from the cooling
assembly support bracket on the left and right sides.
44. Properly support the bracket, and remove the four
bolts (1) securing the bracket to the hood support. Re-
move the assembly. Set the assembly aside.
45. Loosen the clamp (1) and disconnect the coolant fill
line.
46. Loosen the nuts (2) and (3) and disconnect the cab
heater supply and return lines.
47. Disengage the clamp (4) and remove the air bleed
hose.
48. Remove the three bolts (5) securing the front support
bracket.
Engine - Engine and crankcase
47681318 16/05/2017
10.1 [10.001] / 11
32
RCPH10CCH562AAB
33
RCPH10CCH572AAB
34
RCPH10CCH037BAB
35
RCPH10CCH038BAB