New Holland T8.295 Service Manual page 55

28. Loosen the nuts (1) and disconnect the compressor
inlet (2) and outlet (3) tubes.
29. Disconnect the harness connector to the SCR heater
control valve solenoid (1).
30. Raise the locking wire (2) and disconnect the heater
supply connector (3) from the valve.
31. Repeat for the outlet hose connection (located on the
right side of the valve).
32. Disconnect the main engine to chassis harness con-
nector.
33. Disconnect the auxiliary engine to chassis harness
connectors (1).
Engine - Engine and crankcase
47681318 16/05/2017
10.1 [10.001] / 8
20
RCPH10CCH789AAB
21
RCPH10CCH790AAB
22
RCPH10CCH791AAB
23
RCPH10CCH792AAB