AGCO FENDT 938 Vario MT Operator's Manual
  1. Manuals
  2. Brands
  3. AGCO Manuals
  4. Tractor
  5. FENDT 938 Vario MT
  6. Operator's manual

AGCO FENDT 938 Vario MT Operator's Manual

Rubber track tractor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator's Manual
Rubber Track Tractor
938 Vario MT
AGCF0938xJxxx1001-
940 Vario MT
AGCF0940xJxxx1001-
943 Vario MT
AGCF0943xJxxx1001-
North America
4205 River Green Parkway, Duluth GA 30096 USA
September 2020
FENDT is a worldwide brand of AGCO
589611D1G
© AGCO 2020
EME
Original Operator's Manual
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FENDT 938 Vario MT and is the answer not in the manual?

Questions and answers

Related Manuals for AGCO FENDT 938 Vario MT

Summary of Contents for AGCO FENDT 938 Vario MT

  • Page 1 Rubber Track Tractor 938 Vario MT AGCF0938xJxxx1001- 940 Vario MT AGCF0940xJxxx1001- 943 Vario MT AGCF0943xJxxx1001- North America 4205 River Green Parkway, Duluth GA 30096 USA September 2020 FENDT is a worldwide brand of AGCO 589611D1G © AGCO 2020 Original Operator's Manual English...
  • Page 2 Find manuals at https://best-manuals.com...
  • Page 3 Table of contents Rubber Track Tractor 1 Safety ..............17 .
  • Page 4 Table of contents 1.3.18 Engine ............38 Chassis safety signs .
  • Page 5 Table of contents Pre-Delivery ............64 2.4.1 Pre-Delivery Inspection checklist .
  • Page 6 Table of contents 3.7 .13 Auxiliary mounting bar ..........110 3.7 .14 Headliner service door .
  • Page 7 Table of contents 3.12.5 Diagnostics ........... 164 3.12.6 Varioterminal .
  • Page 8 Table of contents 3.17 .14 Set the slip target value ......... . 215 3.17 .15 Set the sensitivity of the slip control system .
  • Page 9 Table of contents 3.25.8 Deactivate/Activate the turboclutch function ......248 3.25.9 Change the direction of travel ........249 3.25.10 Program the change in direction of travel speeds .
  • Page 10 Table of contents 3.32 Common hydraulic connections ........302 3.32.1 Connect a single acting cylinder .
  • Page 11 Table of contents 3.41.2 Change cameras ..........337 3.41.3 Display the camera image while reversing .
  • Page 12 Table of contents 4.8.1 Engine heater ..........391 .
  • Page 13 Table of contents Engine ............443 5.5.1 Replace the engine air filter .
  • Page 14 Table of contents 5.11.1 Change the wiper blades ......... 480 5.11.2 Check the windscreen washer fluid level .
  • Page 15 Table of contents 8 Index ..............545 Rubber Track Tractor 589611D1G...
  • Page 16 Table of contents Rubber Track Tractor 589611D1G...

  • Page 17: Table Of Contents

    Table of contents 1 Safety Safety instructions ............19 1.1.1 Operator Manual .
  • Page 18 Table of contents 1.3.18 Engine ............38 .

  • Page 19: Safety Instructions

    1. Safety 1.1 Safety instructions GUID-BED3B890-BC33-4986-BA35-82EF8922534A [V2] 1.1.1 Operator Manual This operator manual uses the latest information available at the time of publication. Read the operator manual carefully before operating the machine. Right-hand and left-hand, as used in the operator manual, is determined by facing the direction that the machine travels when in use.

  • Page 20: Safety Signs

    Keep the safety signs clean. If it is necessary, clean the safety signs with a weak soap and water solution. GUID-F9D59F68-8014-4549-B346-3FE8D9739D94 [V2] 1.1.6 Important safety information IMPORTANT: Any Modifications to the machine or systems not authorized by AGCO will void the AGCO Warranty. This includes, but is not limited to hitches. WARNING:...

  • Page 21: General Safety Instruction

    1. Safety GUID-5D629BA7-D659-48B8-A7B0-3B99F135B7BA [V1] 1.1.7 General safety instruction CAUTION: Carefully read the operator manual before operating the machine. See all instructions and safety rules when operating or doing maintenance. GUID-FE6A41D4-536F-4C0D-BE60-FA0CCDEEB171-high.jpg [High] Fig. 3 Do not start the engine until the area is free of personnel.

  • Page 22: Pressurized Air

    The maximum air pressure for cleaning purposes must be below 205 kPa (30 psi). GUID-DABC7CAA-9A08-4236-A20C-E92972E9FAB3 [V1] 1.1.9 Asbestos information AGCO equipment and replacement parts are asbestos free. AGCO recommends the use of only correct AGCO replacement parts. GUID-8A44CF3B-7FC0-4A49-8BDF-71575A27E588 [V1] 1.1.10 Electrical storm injury prevention When lightning is striking in the vicinity of the machine, the operator should not attempt to dismount or mount the machine.

  • Page 23: Before You Start The Engine

    1. Safety GUID-344A454E-7D26-49D5-9AB4-3FEEFA88AFD5 [V3] 1.1.12 Before you start the engine Start the engine only from the operator compartment. Never short across the starter terminals or batteries. Shorting can damage electrical system or cause unexpected machine movement. Adjust the seat so full pedal travel can be achieved with operator's back against seat back.

  • Page 24: Operating Procedures

    1. Safety GUID-D067D7D0-F186-4274-857C-255352F3AF1A [V1] 1.1.15 Operating procedures The machine will turn with the transmission control lever in the neutral position when the engine is operating and the steering wheel is turned. Only operate the machine while in the operator's seat. Securely connect the seat belt while operating the machine.

  • Page 25: Prevent Contact With Power Lines

    1. Safety GUID-68BB2502-ACF8-4737-8720-3B2C47AED6C1 [V1] 1.1.17 Prevent contact with power lines Prevent Contact with Power Lines - When operating the machine prevent contact with low hanging power lines. Rural areas can have areas where power supply lines can touch part of the machine during usual operation.

  • Page 26: Rollover Protective Structure

    Do not change structure by welding, cutting, adding weight, or drilling holes into structure. Any change not specifically authorized by AGCO invalidates AGCO certification for ROPS. The protection offered by ROPS will be impaired if ROPS has structural damage or alteration. Damage to structure can be caused by a turn over or by falling objects.

  • Page 27: Oils

    1. Safety GUID-BDBCD281-B073-40B0-A37C-9716BF8A6468 [V1] 1.1.23 Oils Pressurized hot oil and hot components can cause personal injury. Do not allow hot oil to contact skin. Do not allow hot components to contact skin. Remove the hydraulic tank filler cap only after the engine has been stopped. The filler cap must be cool enough to touch with a bare hand.

  • Page 28: Batteries

    1. Safety GUID-074A76CF-7A49-411A-B5E5-757091C83001 [V2] 1.1.26 Batteries A lead acid battery generates flammable and explosive gases. Keep sparks and flames away from the battery. WARNING: Sulfuric acid in battery electrolyte is poisonous. The acid is strong enough to burn skin, eat holes in clothing and cause blindness if got into eyes.

  • Page 29: Exhaust Fumes

    1. Safety GUID-7F41C7C3-DACC-46D2-ADC7-531D148964D3 [V2] 1.1.27 Exhaust fumes Always work in a correct ventilated area. Engine exhaust fumes can cause sickness or death. If necessary to run engine in a closed area, use correct equipment to safely remove exhaust fumes from area. Always open the doors and get outside air into area.

  • Page 30: Fire Extinguisher

    1. Safety Do not smoke in areas used for storing flammable materials. Do not operate machine near any flame. Do not weld on lines or tanks that contain flammable fluids. Do not flame cut lines or tanks containing flammable fluid. Clean any such lines or tanks fully with a nonflammable solvent before welding or flame cutting.
  • Page 31 1. Safety • parking brake • horn • windshield wiper and washer • rear view mirrors • etc. Repair or replace a component not in correct operating order. Do not drive at a speed causing machine to lose control. Obey all traffic rules. Operate the machine with hazard lights on, unless prevented by law. The operation of work lamps while driving on public roads is prohibited.

  • Page 32: Safety Signs And Labels

    Replace any safety sign that is damaged or missing. If a safety sign is attached to a part of the machine that is replaced, install a safety sign on the replacement part. Any AGCO dealer can provide new safety signs. NOTE: Do not remove or block any safety sign or instruction sign.

  • Page 33: Engine Safety Signs

    1. Safety GUID-6A02DC87-AE50-4B0D-B639-18180FBC5D01 [V1] 1.3 Engine safety signs 529903D1 01 562327D1 2 562325D1 2 511129D1 01 529901D1 02 562309D1 2 566832D1 1 562350D1 2 TRHJA0110114301 568895D1 1 GUID-185A438C-B34C-4CD9-9AF4-07A05C491DA3-low.svg [Low] Fig. 19 Original art: /o/VIRTUAL_BUILD_SESSION_FILES/Tech Writers/TCM/ST4/Engine safety signs.ai Rubber Track Tractor 589611D1G...

  • Page 34: Engine Oil Sign

    1. Safety GUID-B809BE8E-DAEE-4C27-A837-5F941FB0E8AA [V4] 1.3.1 Engine oil sign Engine oil sign Check the level of the engine oil daily. GUID-7C462C44-E836-49FC-8284-C69790D64A74 [V1] 1.3.2 Engine oil filter Engine oil filter Change the engine oil filters, as necessary. See the maintenance schedule for the service intervals. Discard the used filters correctly.

  • Page 35: Fuel Filter

    1. Safety GUID-4A321CD3-19EE-4965-9F8D-D00C39289C11 [V1] 1.3.5 Fuel filter Fuel filter The decal is located on the fuel filter housing. GUID-0A978768-31DF-4F9F-B1DE-7149146AA421 [V1] 1.3.6 Run-over hazard Run-over hazard Personal injury or risk of machine run-over can occur. Do not short across starter terminals from the ground to start machine.

  • Page 36: High Pressure Hazard

    1. Safety GUID-E8092D6C-D1E1-4A45-8824-21AFE83DAF59 [V2] 1.3.9 High pressure hazard High pressure hazard Prevent contact with high-pressure fluids. Oil leaks can cause a high pressure fluid flow which can go through skin. Use a piece of wood or cardboard to find leaks not hands. Protect hands and body from the high pressure fluids.

  • Page 37: Fuel Filter

    1. Safety GUID-A5842CB1-21CF-4B58-9B1B-7F82A6DF6522 [V1] 1.3.12 Fuel filter Fuel filter The decal is located on the fuel filter. GUID-66D86DF7-6153-4B84-BAF0-B91AE8546CCF [V1] 1.3.13 Separator filter Separator filter The decal is located on the fuel water separator filter. GUID-FD8F5ABA-6777-4E76-A4FC-B5E060EBB4C1 [V1] 1.3.14 Engine oil filter Engine oil filter Change the engine oil filters, as necessary.

  • Page 38: Air Conditioning

    1. Safety GUID-A8FB8C2B-E94E-4EF8-8B9A-A709DD01A8B3 [V2] 1.3.16 Air conditioning Air conditioning This decal shows the capacity of refrigerant for the air conditioning system. TRHJA0110114101 GUID-B5E55290-80B4-4E84-8226-9D088840EA1E [V2] 1.3.17 Explosion hazard Original art: /o/More/ST4/air conditioning ACW3341890-1-ECN201380-.pdf Explosion hazard Do not use ether at any time. Ether used as a starting fluid can cause engine damage and/or personal injury.
  • Page 39 1. Safety GUID-81A93E86-31C1-47C0-B3D8-3B6C31F4241D [V2] 1.4 Chassis safety signs 566829D1 562319D1 2 562354D1 2 562354D1 2 501299D1 1 501299D1 1 501251D1 1 501251D1 1 501300D1 1 501300D1 1 501299D1 1 501299D1 1 559983D1 2 559983D1 2 ACX2800670 TRHJA0110406901 GUID-8D213090-8811-40D7-AFE7-7454E45622D3-low.svg [Low] Fig. 20 Original art: /o/VIRTUAL_BUILD_SESSION_FILES/Tech Writers/TCM/ST4/TRGJA0110081501.pdf Rubber Track Tractor 589611D1G...
  • Page 40 1. Safety GUID-396F599F-492B-44E9-B009-B2126383F3A4 [V1] 1.4.1 Filter decal Filter decal The cab for this machine is a category 2. This cab will not give protection against chemical fumes and aerosols. This cab will give protection against solid particles. GUID-858B93D9-6179-4E81-9F17-318D86E10002 [V2] 1.4.2 PIN plate PIN plate The PIN plate gives specific information about the machine.
  • Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

Fendt 940 vario mtFendt 943 vario mt

Table of Contents