Charging Battery - Invacare Aquatec R User Manual

Bath lift
Hide thumbs Also See for Aquatec R:
Table of Contents

Advertisement

Available languages

Available languages

4.3 Charging Battery

The bath lift cannot be used when the battery is charging.
WARNING!
Risk of Electric Shock
– Only recharge the battery in dry rooms at room
temperature (15 °C to 25 °C) and never in the
bathroom.
Risk of Damage
– Only use the charger supplied to charge the
battery in the hand control.
– Only connect the charger to the mains supply
when the hand control is connected to the
charger.
– Make sure that the voltage specifications
shown on the charger correspond to those of
the mains supply.
A
F
E
1574470-E
B
G
C
D
Fig. 4-10
1. Insert the jack plug F of the charger C into the jack
socket E on the spiral cable D of the hand control A
until it engages.
2. Insert the mains plug B of the charger into a power
socket.
The red indicator lamp G on the hand control
extinguishes when the battery is completely charged.
It is not possible to overcharge the battery.
3. Disconnect the charger from the power socket.
4. Pull the jack plug of the charger out of the jack socket
of the hand control.
Setup
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquatec fAquatec xl

Table of Contents