Connect Computer And L2 Plus; Turn On Your L2 Plus - Feelworld L2 PLUS User Manual

Note: If your computer only has a Type-C port, you can use a USB-A to Type-C cable to transmit the webcam
signal. Please note that the Type-C cable you choose needs to support data transmission. The signal is
recognized in Windows and MAC system as「FEELWORLD」.

2.6 Connect Computer and L2 PLUS

Software control: connect computer and L2 PLUS with CAT6 cable
Record and Stream: connect L2 PLUS's USB-A and L2 PLUS's USB 3.0 port with USB3.0 cable
(Note: the color of USB3.0 port is blue)
Minimum System Requirements for macOS
● macOS 11.0 Big Sur or later
● macOS 10.15 Catalina
Minimum System Requirements for Windows
● Microsoft Windows 10 64-bit
Note：The IP address of the L2 PLUS must be in the same WLAN segment as the computer.

2.7 Turn on Your L2 PLUS

The device will enter to the boot interface after turning on .
9