Safety Information
• Do not connect or disconnect the LED strip when the circuit is powered.
• Do not connect the LED strip to the power supply while it is in the packing.
• Do not connect this light to another manufacturer's product.
• Do not press on the LEDs and components to avoid physical damage.
• Interconnection shall be made only by the use of the supplied connectors. All open ends must be sealed-off before use.
• Please read the installation guide carefully for detailed installation planning.
Dimensions
Vertical Bending (VB)
11.81"±0.59"/
11.81"±0.59"/
2.32"/59 mm
300±15 mm
2.32"/59 mm
300±15 mm
0.72"/18.2 mm
0.72"/18.2 mm
11.81"±0.59"/
Horizontal Bending (HB)
2.32"/59 mm
300±15 mm
11.81"±0.59"/
2.32"/59 mm
300±15 mm
0.52"/13.2 mm
0.52"/13.2 mm
Model
Model
RGB+W (14.4W/m) &
RGB+W (14.4W/m) &
RGB (11W/m)
RGB (11W/m)
DW & W (9.6W/m)
DW & W (9.6W/m)
0.94"/24 mm
Remark: For other customize lengths (in multiply of 100 mm), the actual product length would be customize length + 20 mm.
Model
Max. Ribbon length with single
Remark: For other customize lengths (in multiply of 100 mm), the actual product length would be customize length + 20 mm.
0.94"/24 mm
p
ower feed
RGB+W
26.2' / 8 m (CE)
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
Max. Ribbon length with
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
Model
20' / 6.1 m (ETL)
single power feed
59 ± 0.5 mm
RGB
26.2' / 8 m (CE, ETL)
59 ± 0.5 mm
Max. Ribbon length with
RGB+W & RGB
8000 mm
Model
single power feed
DW & W
32.8' / 10 m (CE)
DW & W
10000 mm
30.2' / 9.2 m (ETL)
RGB+W & RGB
8000 mm
Remark: For other customized lengths (in multiples of 3.94" / 100 mm), the actual product length would be customized length + 0.78" / + 20mm.
Remark: For other customize lengths (in multiply of 100 mm), the actual product length would be customize length + 20 mm.
DW & W
10000 mm
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
Do and Don't Do
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
Remark: For other customize lengths (in multiply of 100 mm), the actual product length would be customize length + 20 mm.
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
59 ± 0.5 mm
CONN. 1
RB CONNECTOR ENDCAP 120OHMIP67 (AM400870055)
56 ± 0.5 mm
Min. Bending Radius for Ribbon body: 3.94"/100 mm
CONN. 1
56 ± 0.5 mm
Min. Bending Radius for cable: 1.18"/30mm
59 ± 0.5 mm
VB
CONN. 1
CONN. 1
≥1.18"/30mm
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
RB 5PIN STARTER CABLE 1M IP67 (AM400840055)
RB 5PIN STARTER CABLE 3M IP67 (AM400850055)
CONN. 1
56 ± 0.5 mm
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)
HB
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)
CONN. 1
56 ± 0.5 mm
48 mm
≥ 1.2"/30mm
48 mm
CONN. 1
CONN. 1
39 mm
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)
39 mm
www.traxontechnologies.com | www.osram.us/traxon
48 mm
CONN. 3
©2021 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE
RB RJ45 STARTER Y-CABLE IP67 (AM401000055)
WITHOUT NOTICE.
Mounting Guide
48 mm
CONN. 3
Media Pixel Ribbon DMX Outdoor
VB HB Mounting Guide
0.76"/19.2 mm
0.76"/19.2 mm
Max. Ribbon length with
Max. Ribbon length with
single power feed
single power feed
8000 mm
0.91"/23.2 mm
8000 mm
0.75"/19 mm
10000 mm
10000 mm
0.91"/23.2 mm
0.75"/19 mm
1000 or 3000 +/- 20mm
1000 or 3000 +/- 20mm
≥ 3.94"/150mm
1000 or 3000 +/- 20mm
1000 or 3000 +/- 20mm
CONN. 3
59.2 ± 1 mm
CONN. 3
59.2 ± 1 mm
CONN. 3
≥ 5.9"/150mm
CONN. 3
42.8 ± 1 mm
CONN. 2
42.8 ± 1 mm
CONN. 2
59.2 ± 1 mm
CONN. 2
CONN. 2
59.2 ± 1 mm
L
L
0.6"/15 mm
0.6"/15 mm
0.63"/16 mm
0.63"/16 mm
L
L
0.39"/10 mm
0.39"/10 mm
Actual product length with
Actual product length with
endcap at 2-ends, L
endcap at 2-ends, L
8000 + 20 mm
0.79"/20 mm
8000 + 20 mm
10000 + 20 mm
10000 + 20 mm
0.79"/20 mm
Actual product length with endcap
at 2 -ends, L
26.2'+0.8" / 8 m+20 mm (CE)
Actual product length with
20'+0.8" / 6.1 m+20 mm (ETL)
endcap at 2-ends, L
26.2'+0.8" / 8 m+20 mm (CE, ETL)
Actual product length with
8000 + 20 mm
endcap at 2-ends, L
32.8'+0.8" / 10 m+20 mm (CE)
10000 + 20 mm
30.2'+0.8" / 9.2 m+20 mm (ETL)
8000 + 20 mm
10000 + 20 mm
DO NOT twist Media Pixel Ribbon.
Damage will be caused to the internal circuity.
Wire#
Wire#
Non-Bendable Length of 0.79"/20 mm near the
connector end or near the ribbon cable entry MUST be adhered to.
300 ± 20 mm
300 ± 20 mm
47 ± 1 mm
47 ± 1 mm
300 ± 20 mm
47 ± 1 mm
09/21 V1.2
300 ± 20 mm
11.81"±0.59"/
11.81"±0.59"/
300±15 mm
300±15 mm
0.75"/19 mm
0.75"/19 mm
0.94"/24 mm
0.94"/24 mm
Wire#
Description
Wire#
Description
1
Address(PI)
1
Address(PI)
2
V-
2
V-
3
DMX+
3
DMX+
4
V+
4
V+
5
DMX-
Description
5
DMX-
Color
1
Address(PI)
Green
Description
Color
2
V-
Black
1
Address(PI)
Green
3
Yellow
DMX+
2
V-
Black
4
V+
Red
0.79"/20 mm
3
Yellow
DMX+
5
DMX-
Blue
150 ± 10 mm
4
V+
Red
150 ± 10 mm
56 ± 0.5 mm
5
DMX-
Blue
56 ± 0.5 mm
CONN. 1
CONN. 1
150 ± 10 mm
56 ± 0.5 mm
150 ± 10 mm
2.20"/56 mm
2.20"/56 mm
11.81"±0.59"/
2.20"/56 mm
300±15 mm
11.81"±0.59"/
2.20"/56 mm
300±15 mm
Color
Color
Green
Green
Black
Black
Yellow
Yellow
Red
Red
Blue
Blue
CONN. 1
CONN. 1
1 of 4
CONN. 1
Need help?
Do you have a question about the Media Pixel Ribbon DMX Outdoor VB and is the answer not in the manual?
Questions and answers