BRP EVINRUDE E-TEC 200 Service Manual page 228

POWERHEAD
POWERHEAD DISASSEMBLY
IMPORTANT:
If the
removed fro m the cranksha ft, it must be dis-
carded. DO NOT reuse it.
Use a b earing sep arator to suppo rt t he bearing,
and press off the crankshaft.
Remove and inspect crankcase seal rings. Iden-
tify each ring for installation in original location.
226
lower main bearing is
30291
Remove center ma in be arings an d sp lit sleeves
for inspection. DO NOT mix parts. Note location of
bearings for reassembly.
5198
5195