Related Manuals for Reed Instruments R6030
Summary of Contents for Reed Instruments R6030
- Page 1 R6 0 3 0 T mp r t r & H midit y gg r t r ct i REED Inst r ument s 1 -8 7 7 -8 4 9 -2 1 2 7 | info@r eedinst r ument s.com | www.r eedinst r ument s.com...
-
Page 2: Table Of Contents
Product Disposal and Recycling .............. 10 Product Support ..................11 Int r oduct ion Thank you for purchasing your REED R6030 Temperature & Humidity Datalogger. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your data logger will provide years of reliable service. -
Page 3: Product Quality
Pr oduct Qualit y This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet stated product speci cations. If a certi cate of calibration is required please contact the nearest authorized REED distributor or authorized Service Center. Please note an additional fee for this service will apply. -
Page 4: Speci Cations
Specificat ions Temperature Measuring Range: -40 to 158°F (-40 to 70°C) Accuracy: ±1.8°F (1.0°C) Resolution: 0.1°F/°C Humidity Measuring Range: 0 to 100% RH Accuracy: 0 to 20% & 80 to 100% : ±5% 20 to 40% & 60 to 80% : ±3.5% 40 to 60% : ±3% Resolution: 0.1% RH... -
Page 5: Instrument Description
Inst r ument Descr ipt ion R6030 Temperature & Humidity Datalogger Temp.: -40 to 70°C -40 to 158°F Humidity: 0 to 100%RH 5. MAX/MIN Value Button 1. Data Logging LED 6. Temperature & 2. Alarm LED Humidity Sensors 3. LCD Display 7. -
Page 6: Display Description
Display Descr ipt ion 1. Low Battery Indicator 5. Relative Humidity 2. MAX/MIN Indicators 6. Memory Full 3. Record Mode Active 7. Temperature Unit of Mesure 4. Date & Time (10 sec rotation) Supplement al Display Not es 1. Press the MAX/MIN button to view the recorded Max and Min values with the time they were recorded. -
Page 7: Operating Instructions
Bat t er y Inst allat ion or Bat t er y Replacement A 3.6V battery is provided with the R6030. Please note that only a 3.6V battery should be used with the instrument. In order to install the battery... -
Page 8: Supplemental Operation Notes
The R6030 will automatically begin recording once setup is complete and the datalogger is removed from the PC. The R6030 needs to be reset from the software in order to start a new data logging session. Please note the time & date on the R6030 must be updated from the software. -
Page 9: Setting The Combination Lock
I cannot install my software on my work computer, do you know why? Please note that you will require administrative rights to install and run the R6030 software. In order to install and run the software you will have to contact your IT department/personnel. -
Page 10: Product Care
REED Instruments guarantees this instrument to be free of defects in material or workmanship for a period of one (1) year from date of shipment. During the warranty period, REED Instruments will repair or replace, at no charge, products or parts of a product that proves to be defective because of improper material or workmanship, under normal use and maintenance. -
Page 11: Product Support
Pr oduct Suppor t If you have any questions on your product, please contact your authorized REED distributor or REED Instruments Customer Service by phone at 1-877-849-2127 or by email at info@ reedinstruments.com. Please visit www.REEDIN STRUM EN TS.com for the most up-to-date manuals, datasheets, pr oduct guides and softwar e. - Page 12 Te s T & M e a s u Re w ITH Co n f IDe n Ce CHe Ck o u T o u R l a Te s T PRo Du CTs ! REED Inst r ument s 1 -8 7 7 -8 4 9 -2 1 2 7 | info@r eedinst r ument s.com | www.r eedinst r ument s.com...
Need help?
Do you have a question about the R6030 and is the answer not in the manual?
Questions and answers