Coleman 9995B Series Instructions For Use Manual page 11

Tear Down/Clean
Step 3
■ Remove Regulators from
Propane Cylinder Connection.
(Fig. 44)
Step 4
■ Remove Grease Pans. Slide
out from front of grill to clean or
install new aluminum liners in
Grease Pans. (Fig. 45)
Step 5
■ Unlock tab as shown. (Fig. 46)
■ Slide out Grease Tray. (Fig. 47)
■ Clean thoroughly before storing grill.
■ Slide Grease Tray back into position
under grill and lock tab. (Fig. 48)
continued
Fig. 47
Tear Down/Clean
Step 6
■ Center Lid goes on first. (Fig. 49)
Fig. 44
Step 7
■ Lift up on Right Side Shelf to remove from grill and fold in flaps
as shown. (Fig. 50 & 51)
Step 8
■ Place folded up Right Lid (Shelf) on grill.
(Fig. 52)
IMPORTANT: Make sure Lid fits into
Fig. 45
Channel on Center Lid.
■ Repeat to store Left Lid (Shelf).
■ Be sure to replace all three lids after use.
(Fig. 53)
LEFT LID (SHELF)
Fig. 46
Step 9
■ Remove the 20 lb. L.P. gas cylinders from the tank mounts and
replace the protective caps on the cylinders. (Fig. 54 & 55)
■ Fold the tank mounts into the storage position. (Fig. 56)
Fig. 48
continued
Fig. 50
CENTER LID
CENTER LID
RIGHT LID (SHELF)
Fig. 54 Fig. 55
Fig. 49
Fig. 51
CHANNEL
Fig. 52
Fig. 53
Fig. 56
11