Choosing A Program To Run In Auto - FADAL VMC 3020 Operator's Manual

Fadal
Note:
October 2000

Choosing a Program to Run in Auto

To choose a program to run in AUTO it must first be active.
1) Press the PROGRAM MANAGER hard key.
2) Use the cursor keypad arrows, cursor down and over to
highlight the program name.
3) Press the Execute soft key. The main screen in auto will be active.
4) Press the NC CYCLE START hard key to begin automatic
operation.
Fadal/Sinumerik 810D CNC: Definition of Offsets
SIEMENS CONTROL
Operator Manual
57