Incremental Jog Using The Mpg Or Jog Keys; Setting The Increment - FADAL VMC 3020 Operator's Manual

Fadal
October 2000

Incremental Jog Using the MPG or JOG Keys

Setting the Increment

1) Select the axis to be jogged with the axis selector switch that is
located directly to right of the manual pulse generator.
2) Select the increment to jog:
a) Press the MPG hard key until the LED above the key
is lit.
b) Press the Settings soft key.
Fadal/Sinumerik 810D CNC: Jog Modes Of Operation
SIEMENS CONTROL
1
Step 2c
Step 3
Operator Manual
21