Pre-Operation Inspection Sheet - Salford BBI ENDURANCE Operator's Manual

Pre-Operation Inspection Sheet

Read the Operator's Manual carefully and become completely
familiar with the implement.
Do Not Operate Unless
You learn and practice the principles of safe machine operation contained in this
operator's manual.
1. Avoid hazardous situations.
2. Always perform a pre-operation inspection.
3. Always perform function tests prior to use.
4. Inspect the workplace. Know and understand the workplace inspection before going on to the
next section.
5. Only use the machine as it was intended.
General
• Check that all parts are installed
properly and tightened according to
assembly manual
• Check that all hydraulic hoses are
properly attached and clamped
Tires
• Check if tires are inflated properly
(refer to maintenance section)
• Check if tire lug nuts/bolts are
torqued properly (refer to
maintenance section)
Notes:
Page 21
Endurance Operator Manual 2019 V1
Set-up and Preparation
:
Salford BBI Inc.
Lubrication
• Grease all zerks on all shafts,
bearings and pivots
• Lubricate all chains before operating
or transporting
Transport
• Check that all lights and safety signs
are installed and legible
• Check that all hydraulic hoses are
connected
• Check that the proper hitch pin is
used to connect machine to tractor
• If transporting long distances and the
machine has ground drive, ensure
lockout is engaged
07/23/19