Advertisement
Pteranodon : Assembly Instructions
Assemble the wings
1. Assemble
, and attach it to
. Next, cut away the piece on
marked by the curved line.
After attaching the pieces together, fold these parts back and then glue them down.
Align these straight lines and attach together.
2. Roll the sections marked A, B and C and glue them to form cylinders.
C
A
B
Assemble by fitting B over A.
*Assemble
and
in the same way.
It should look like this viewed from the side.
3. Attach the left and right wings together. Next, assemble
, and glue it to the wings.
is a reinforcing part, so attach it securely.
Advertisement
