Table of Contents
Advertisement
CENTER PANEL
AUTO HOLD*
AUTO HOLD temporarily maintains the vehicle at a standstill even if the brake
pedal is released . AUTO HOLD can be turned ON/OFF using the AUTO HOLD
switch
B
on the driver's panel . Before AUTO HOLD will operate, the driver's door,
engine hood and trunk must be closed and the driver's seat belt must be fastened .
The AUTO HOLD indicator, which is in the instrument cluster, has four states:
White: Standby - With vehicle at a standstill, and AUTO HOLD switch
ON, the indicator will illuminate white . While driving the vehicle (vehicle is not at a
standstill), the AUTO HOLD indicator will remain white .
Green: Engaged - When coming to a complete stop by depressing the brake pedal,
the AUTO HOLD indicator changes from white to green .
OFF (not illuminated): The indicator will turn OFF when the AUTO HOLD switch
is manually turned OFF or when the EPB is manually turned ON .
Yellow: Malfunction - When the indicator is illuminated yellow, there may be a system
malfunction . Take your vehicle to a local Kia dealer .
ALWAYS CHECK THE OWNER'S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
B
turned
B
QR CODE
Electric Parking Brake
(EPB) / Auto Hold Video
To view a video on your
mobile device, snap this
QR code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/vg13/2014
23
*IF EQUIPPED
Advertisement
Table of Contents
