Table of Contents
Advertisement
STEERING WHEEL CONTROLS
Headlights & High Beams
AUTO Light* function — When the light switch is in the
AUTO Light position, the tail lights and headlights will
turn ON/OFF automatically depending on the amount
of light outside the vehicle .
Push lever to turn
High Beams ON,
pull lever to flash
Headlights /
High Beams
Rotate lever to change the Headlight function:
:
:
:
AUTO*
OFF
:
ALWAYS CHECK THE OWNER'S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
Headlight position
Parking light position
Automatic Headlights position
OFF position
Turn Signals & Fog Lights
One-Touch Lane Change Signal is activated by moving
the Turn Signal Lever slightly for less than 1 second and then
releasing . The lane change signal will blink 3 times .
To change how many times the Lane Change Signal blinks
(3/5/7), go to User Settings Mode in the LCD Display .
For more information on the User Settings Mode, please refer to your
Owner's Manual.
Move lever Up/Down for Right/Left Turn Signal
One-Touch
Lane Change
Signal
Push toggle switch to turn Fog Lights ON/OFF
REMINDER:
Headlights must be ON for Fog Light operation .
11
*IF EQUIPPED
Advertisement
Table of Contents
