Windshield Wipers & Washers; Lcd Display Controls And Modes - Kia CADENZA 2014 Manual

STEERING WHEEL CONTROLS
Windshield Wipers & Washers
Auto Rain Sensing*
The rain sensor located on the upper end of the
windshield glass senses the amount of rainfall and
controls the wiping cycle for the proper interval . The
more it rains, the faster the wiper operates . When the
rain stops, the wiper stops .
To adjust the Auto Rain Sensing speed setting, move the
speed control switch up/down .
A
Move lever Up/Down to change Wiper modes.
A
Pull to spray and wipe.
•
QUICK TIPS
• With the Engine Start/Stop button in the ON position and the
wiper switch is in AUTO mode, the wiper will operate once to
perform a self-check of the system
• Set the wiper to OFF position when the wiper is not in use
12 CADENZA
F E A T U R E S & F U N C T I O N S G U I D E
MIST: Single wipe
Faster
OFF: Wiper off
INT*: Intermittent
wipe
AUTO*: Auto
Control wipe
LO: Slow wipe
Slower
HI: Fast wipe

LCD Display Controls and Modes*

Press Mode/Select button
differerent LCD Modes:
A
(LCD Display Control button
located on Steering Wheel)
LCD display modes:
Type A Type B
Trip Computer Mode: Displays driving
information for tripmeter, fuel economy, etc.
Smart Cruise Control (SCC) / Lane
Departure Warning System (LDWS)*:
Displays the state of the SCC and LDWS
A/V Mode: Displays the state of the A/V
System
Turn-by-Turn Mode*: Displays the state of
the Navigation system
Information Modes: Informs on upcoming
service intervals
User Settings Mode: Change settings of the
doors, lamps and other features
to scroll through
A
*IF EQUIPPED