• Do not use the device in potentially explosive rooms or areas and do not install it there. Follow the manual • Do not use the device in aggressive atmosphere. Information marked with this symbol indicates that the operating manual must be observed. radiant heater IR 2010 SC...
Page 3
• Keep a safety distance of at least 1.80 m between the device's radiator side and all combustible materials such as textiles, curtains, beds and sofas. • Allow the device to cool down before transport and/or maintenance work. radiant heater IR 2010 SC...
Page 4
Improper installation or mounting entails a risk of fire. Warning Risk of injury due to infrared radiation! Do not stay in the device's immediate vicinity for too long. Do not look directly into the device for too long. Observe the minimum distances. radiant heater IR 2010 SC...
Hold onto the mains plug while pulling the power • silent operation cable out of the mains socket. 3. Do not reconnect a defective device to the mains. • no dust circulation (suitable for allergy sufferers) radiant heater IR 2010 SC...
• Place no further devices or objects on top of the device to prevent it from being damaged. • Remove batteries from the remote control. Designation Carabiner hook Wire rope Mains switch (with operating control lamp) Setscrew Remote control LED element Grille radiant heater IR 2010 SC...
This may cause an electric shock. ü A suitable ceiling holder is preassembled. ü Make sure that the on/off switch (3) of the device is in position 0. 1. Screw the setscrews 4) of the wire rope (2) into the holes provided (8). radiant heater IR 2010 SC...
Activating the LED elements Warning of hot surface The grille (7) heats up during operation and can still be hot after switch-off. Do not touch the grille (7) during operation, wait until it has cooled down after switch-off. radiant heater IR 2010 SC...
• Check the fuse. Switch off any other devices to reduce the load on the line. • Contact a specialist electrical company. The device slightly vibrates during switch-on and then stops vibrating: • Slight vibrations during switch-on are a normal process. No measures are required. radiant heater IR 2010 SC...
• Check whether the unit is switched on. companies or by Trotec. • Check all LED elements for damages. Cleaning the device • The LED elements may be defective. Contact the Trotec customer service. Warning of electrical voltage Never immerse the device in water! Note Wait for at least 3 minutes after maintenance and...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. radiant heater IR 2010 SC...