Network Settings; Adding Ip Cameras - HIKVISION DS-7100NI-Q1 Series Quick Start Manual

Network Settings

Purpose:
Network settings must be properly configured before you operate NVR over network.
Enter the general network settings interface.
Menu > Configuration > Network > General
Configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS
Server.
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain
an IP address and other network settings from that server.
Click Apply.

Adding IP Cameras

Purpose:
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated. Please refer to the User Manual for activating the inactive IP camera.
You can select one of the following three options to add the IP camera.
OPTION 1:
Click to select an idle window in the live view mode.
Click in the center of the window to pop up the Add IP Camera interface.
Network Video Recorder Quick Start Guide
Network Settings
17