Advertisement
Lamp Replacement Instructions
STEP 6 — REPLACE FRONT COVER
IMPORTANT
The lamp module is calibrated for maximum performance and brightness
in this projector. Do not attempt to re-align or adjust the lamp module.
Replace the front cover and tighten the front cover screw to secure the cover to the
Figure 4
projector housing. Do not use excess force. Refer to
.
Figure 4. Replace Front Cover
STEP 7 — RESET THE LAMP HOURS
Once the lamp is replaced it is important to reset the lamp properties. To do this access the
User Menu, use the up/down scroll to highlight the LAMP RESET option and click on the
arrow icon. Refer to Figure 5.
Figure 5. User Menu
4 of 5 Pages
013-100357-02 (Rev. 1)
Advertisement
