Dell U2722D Disassembly Procedure page 3

Move up the bracket, then push the earing-lock and
S15
disconnect the LVDS cable away from the connectors
of the panel module.
Take away the bracket chassis module and then put
S16
the bracket chassis module on a protective cushion.
Remove the Mylar tape from the hooks of the
S17
bracket.
Use a Philips-head screwdriver to remove
S18
screws for interface board and power board.
(No.1 screw size=M4x8, Torque=7
No.2~6 screw size=M3x7.5, Torque=7
6
Remove the power board board and interface
S19
board from the bracket chassis module carefully,
and then disconnect all of the cables.
DELL U2722D/DX
6pcs
kgfxcm;
±1
kgfxcm)
±1
3
2
5
4
1
3