Huawei SDongleA-01 User Manual page 22

FusionSolar Smart PV Management System
Connection
User Manual (Inverters + SDongleA)
Device
Slave
inverter
Dongle
Router
Intelligent
management
system
App
Power distribution
unit
Smart Power
Sensor
Power meter
Issue 02 (2021-11-25)
Description
● A master inverter can be used as a slave inverter.
● SUN2000-33KTL
● SUN2000-29.9KTL/33KTL-A/36KTL
● SUN2000-50KTL/60KTL-M0
● SUN2000-100KTL/110KTL-M0
Purchased by the customer. The model should be
SDongleA-05.
● The router supports WLAN (IEEE 802.11 b/g/n, 2.4 GHz),
and the inverters are within the WLAN signal coverage.
● The WPA, WPA2, or WPA/WPA2 encryption mode is
recommended.
● The Enterprise mode is not supported (such as airport
WLAN and other public hotspots that require
authentication).
● WEP and WPA TKIP encryption modes are not
recommended because they have serious security
vulnerabilities.
● If the access fails in WEP or WPA TKIP mode, log in to
the router and change the encryption mode of the
router to WPA2 or WPA/WPA2.
FusionSolar Smart PV Management System. Software
version: SmartPVMS V500R007C00SPC110 or later.
FusionSolar app of 2.5.8 or a later version. The app can be
locally connected to the inverter and remotely connected to
the FusionSolar Smart PV Management System.
Prepared by the customer
DTSU666-H
Prepared by the customer
Copyright © Huawei Technologies Co., Ltd.
2 Introduction to the Solution
Service
Owner
Huawei
Huawei
Device
supplier
Huawei
Huawei
Device
supplier
Huawei
Device
supplier
16