GAGGLE Roadster 9910032 Assembly Instructions Manual page 7

1. Place Folded Canopy onto stroller frame (Fig. 1).
2. Secure Canopy Side Clip by snapping the end of canopy arm onto Canopy
Clip Lock located on side of stroller (Fig. 2). Repeat for other side.
3. Snap the four snaps along the canopy on the rear of the stroller frame to
secure canopy. (Fig. 3).
4. Pull the canopy rear seat covers down. Secure them to the seat back with the
velcro (Fig. 4).
5. Velcro the canopy sides over top of the stroller frame. Repeat for other side
(Fig. 5).
6. Unfold canopy (Fig. 6).
Fig. 1
Fig. 4
STEP 5 - Canopy Assembly
Fig. 2
Fig. 5
Fig. 3
Fig. 6
7