GAGGLE Roadster 9910032 Assembly Instructions Manual page 6

STEP 3 - Installing/Removing Front Wheels
Front Wheel Installation:
1. Align Front Wheel (D) with wheel hub on front of stroller and insert (Fig. 1). The
wheel will click into place. Pull on wheels to check that they are secured in
place.
2. Repeat for other wheel.
Front Wheel Removal:
Press the release button located on top of wheel hub (Fig. 2) and pull wheel
away from stroller (Fig. 3). Repeat for other wheel.
Fig. 1
STEP 4 - Installing/Removing Front Arm Bar
Arm Bar Installation:
1. Align Front Arm Bar (C) with the retainer slots on the front of the stroller
(Fig. 1). Press down until you hear a click sound. Repeat for other side.
2. Check to see if the front arm bar is secure by pulling on it. The arm bar should
stay securely in place.
Arm Bar Removal:
To remove front arm bar, press the release tab on the inside of the front arm
bar retainer slot (Fig. 2). Then, pull arm bar away from stroller. Repeat for other
side.
Fig. 1
Fig. 2
Fig. 2
6
Fig. 3