Stroller Assembly - GAGGLE Roadster 9910032 Assembly Instructions Manual

1. Lay folded Stroller Frame Assembly (A) on clean floor with harness facing up (Fig. 1).
2. Release the folding lock on the right side of the stroller by pulling outwards on it while
pulling up on the handlebar (Fig. 2).
3. Pull up on handle bar to unfolded position. You will hear a "click" when locked in
unfolded position (Fig. 3).
Fig. 1
STEP 2 - Installing/Removing Rear Wheels
Rear Wheel Installation:
1. Align Rear Wheel (E) with axle tube on stroller and insert (Fig. 1). The wheel will
click into place. Pull on wheels to check that they are secured in place.
2. Repeat for other wheel.
Rear Wheel Removal:
Pull the release tab on bottom of wheel hub (Fig. 2) then pull wheel away from
stroller (Fig. 3). Repeat for other wheel.
Fig. 1
STEP 1 - Unfolding Stroller
Fig. 2
Fig. 2
Fig. 3
5
Fig. 3