Light Switch; Winch Switch (Yxe85Wpsl) - Yamaha WOLVERINE X2 Owner's Manual

Remove the system key immediately after
use, otherwise the switch may change po-
sitions when driving over bumpy roads or
fall out and be lost.
EBU31391

Light switch "

/
L
1
1. Light switch " / /
L H
Set the switch to "
beam and the taillights.
Set the switch to "
H
beam and the taillights.
Set the switch to "
lights and taillights.
/ "
H
"
" to turn on the low
L
" to turn on the high
" to turn off the head-
ECB02061
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU39020
Winch switch "

1. Winch switch (YXE85WPSL)

5-15
/ " (YXE85WPSL)
1
5