Health O Meter 2210KL-AM User Instructions page 9

SET UP INSTRUCTIONS (CONT.)
Sound Options
The display can be set to stay silent or beep while operating the scale. The default setting for Sound
is "enabled". Follow this procedure to enable or disable sound.
1. While the scale is turned off, press and hold ENTER/SELECT then press and release the
button. Hold ENTER/SELECT until "AOb" appears on the display, then release. Use the ▲ or ▼
buttons to advance the display screen until "Snd" appears. Press ENTER/SELECT to change the
setting.
Snd = E Enables sound so the scale beeps when keys are pressed.
Snd = d Disables sound so the scale stays silent when keys are pressed.
2. Choose the setting you prefer and press CLEAR/REWEIGH to save your selection and exit the
options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and then
dashes. When the display shows "0.0" the scale is ready to use.
Locking Unit of Measure
(This feature is not available on KG models)
The weight measuring unit (pounds/LB, kilograms/KG, grams/GM) can be locked to display weight
only in the selected unit of measure. The unit of measure lock default setting is "unlocked". Follow this
procedure to lock the UNIT button.
Note: This lock is not permanent and can be unlocked by the user. For a permanent lock see the
Everlock section on page 11.
®
Note: If Everlock is engaged, this feature will not appear in the Options mode.
1. While the scale is turned off, press and hold ENTER/SELECT then press and release the
button. Hold ENTER/SELECT until "AOb" appears on the display, then release. Use the ▲ or ▼
buttons to advance the display screen until "Unt" appears. Press ENTER/SELECT to change the
setting.
Unt = U Allows the user to toggle weight measurement between LB and KG.
Unt = L Locks the unit button so weight is only displayed in pounds (LB)
Unt =├
Locks the unit button so weight is only displayed in kilograms (KG)
Unt = g Locks the unit button so weight is only displayed in grams (g)
2. Choose the setting you prefer and press CLEAR/REWEIGH to save your selection and exit the
options mode.
3. The scale will restart. The display will show "UEr", followed by a version number, and then
dashes. When the display shows "0.0" the scale is ready to use.
Enabling Unit Display with Unit of Measure Locked
Users can still view the alternate weight measuring unit by enabling the "Unit Display" option. Enabling
the "Unit Display" option allows the user to press and hold the UNIT button to briefly display the weight
in the alternate weight measuring unit. If locked in kilograms or grams, Unit Display w will allow you to
view the weight in pounds. If locked in pounds, Unit Display will allow you to view the weight in
kilograms. If locked in grams, Unit Display will allow you to view the weight in pounds. After releasing
the UNIT button the display will return to the locked weight measuring unit. The "Unit Display" default
setting is "Disable". Follow this procedure to enable "Unit Display" when the weight measuring unit is
locked. Note: If Everlock
1. While the scale is turned off, press and hold ENTER/SELECT then press and release the
button. Hold ENTER/SELECT until "AOb" appears on the display, then release. Use the ▲ or ▼
buttons to advance the display screen until "UdP" appears. Press ENTER/SELECT to change
the setting.
P/N 82-00013 UM2210KL-AM 2210KL4-AM 2210KG-AM 2210KG4-AM Rev20210805
®
is enabled, this feature will not appear in the Options mode.
9