Bosch GBH 5-38 D Original Instructions Manual page 16

16 | English
Technical Data
Rotary Hammer
Article number
Rated power input
Rated speed
Impact rate
Impact energy per
stroke at output/rated
power
Chisel positions
Chiselling capacity in
concrete of medium
hardness
Tool holder
Lubrication
Max. drilling dia.
– Concrete (with twist
drill)
– Concrete (with
break-through drill
bit)
– Brickwork (with core
bit)
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
1 619 929 751 | (19.6.07)
GBH 5-38 D
Professional
GBH 500
Professional
0 611 240 0..
W 1050
rpm 320
bpm 2900
J 7/9
12
kg/h 110
SDS-max
Oil lubrication
mm 38
mm 55
mm 90
kg 5.8
/ II
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions
89/336/EEC, 98/37/EC (until Dec. 28, 2009),
2006/42/EG (from Dec. 29, 2009 on).
Dr. Egbert Schneider
Senior Vice President
Engineering
14.05.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle
Operate your machine only with the auxilia-
ry handle 5.
The auxiliary handle 5 can be set to any position
for a secure and low-fatigue working posture.
Turn the bottom part of the auxiliary handle 5 in
counterclockwise direction and swivel the auxil-
iary handle 5 to the desired position. Then
retighten the bottom part of the auxiliary handle
5 by turning in clockwise direction.
Changing the Tool
With the SDS-max tool holder, simpler and eas-
ier tool changing is possible without additional
aids.
The dust protection cap 1 largely prevents the
entry of drilling dust into the tool holder during
operation. When inserting the tool, take care
that the dust protection cap 1 is not damaged.
of the directives
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools