Specifications; Safety Warnings And Precautions - Central Pneumatic 94446 Assembly And Operating Instructions Manual

Air Inlet
Working Air Pressure
Maximum Air Pressure
Magazine Capacity
Air Consumption
Cleat Size Range
Staple Size Range
* the air pressure setting must not exceed job site regulations/restrictions. the air pressure setting must
not exceed 90 pSi when being used with work pieces that have a thickness of less than 1-3/4".
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Warning: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
read all instructions before using this tool!
1. Keep work area clean
observe work area conditions
2.
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away
handle machines, tools, extension cords, or air hoses.
Store idle equipment
4.
rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job
5.
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate for which it was intended. Do
not modify this tool and do not use this tool for a purpose for which it was not intended.
6. dress properly
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
Use eye and ear protection
7.
a full face shield if you are producing metal filings or wood chips. Wear an ANSI-approved
dust mask or respirator when working around metal, wood, and chemical dusts and
mists.
SKU 94446 For technical questions, please call 1-800-444-3353.

Specifications

Save this Manual

Safety Warnings and precautions

. Cluttered areas invite injuries.
. Do not use machines or power tools in damp or wet
. Children must never be allowed in the work area. Do not let them
. When not in use, tools must be stored in a dry location to inhibit
. Do not attempt to force a small tool or attachment to do
. Do not wear loose clothing or jewelry as they can be caught in
. Always wear ANSI-approved impact safety goggles. Wear
1/4"- 18 NPT
60-125 PSI
125 PSI *
80
4 CFM @ 125 PSI
1-1/2" to 2" L-head Nails
1" to 2" Flooring Staples
REV 06k
Page 2