Respekta CH 16060 SGB Operating & Installation Instructions Manual page 26

English
The lamp module may only be changed by
qualified personnel.
Disconnect the hood from the electricity.
Remove the grease filters.
Use a screwdriver to remove the wire cover.
1)
Put the lamp outwards by hand, remove the wire
terminal to replace the lamp. (See pic 2)
Apply the reverse procedure to reinstall the light.
• ILCOS D code for this lamp is:
DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 1×2 W
– Voltage range: AC 110-240V
fi201203at
Operating- & Installation Instruction
17. Replacing the LED Light module
(See pc
11
1
2
Technical changes reserved
GB