Respekta CH 16060 SGB Operating & Installation Instructions Manual page 23

English
14. COMPONENTS OF STANDARD COOKER HOODS
Min. 65 cm
Max. 75 cm
5
8
1
9
5
Certain models automatically switch to circulation air mode when the charcoal filter is mounted
on the motor. For the other models, proceed as described here below:
Outlet cover (B)
Drawings/Pictures are for illustration purposes only
fi201203at
Operating- and Installation Instruction
EXHAUS AIR MODE
2
4 5
3
7
10
13
CHANGEOVER TO CIRCULATION AIR MODE
Adjuster (A)
Indoor Ventilation outlet
1 Hood body
1
2 Control panel
3 Glass steam screen
pivotally
4 Intake grill
5 Grill fixing bolt
to open, push in direction of arrow
6 Filter mat*
7 Filter mat fixing bracket*
to remove, press ends of brackets down and
6
remove them from the anchorage
8 Upper exhaust air opening
11
9 Rear exhaust air opening*
10 Flange (exhaust air valve)
11 Hood suspension eyelets
12 Blind cover*
13 Holes for locking screws
12
Change positioning flange (10) and blind cover
6
(12) where necessary
7
* depending on Model
Exhaust opening (A) must be covered for
circulation air mode
Disconnect the mains power to the unit.
1.
2. Install the outlet cover (B)
3. Turn the adjuster (A) to indoor position
4 Mount the carbon filter (C) clockwise on the
motor.
(Carbon Filters are not supplied)
Change the carbon filter every 3 - 6 months or
earlier, depending on the cooking habits
8
GB
(C)