Flue Connection; Baffle Plate - Supra NEO 76 G Installation Instructions And User Manual

FITTING THE INSERT INTO THE FIREPLACE
Move the hearth insert up to the fireplace. Pass the mains
supply cable (depending on model) through the hole prepared
in the fireplace. Make sure that the looped mains cable, inside
the fireplace, allows the hearth insert to be moved easily
(insertion and removal for maintenance).
If an air connection is provided, connect the air supply line to
the combustion air collar.
Make sure that the mains cable is not trapped under the
appliance. Adjust the 4 levelling screws and fit the insert into
position.

BAFFLE PLATE

The hearth is fitted with a stainless steel and vermiculite
baffle. This baffle enables efficient heat exchange and helps
soot to be collected when the chimney is swept.
Users should familiarise themselves with how to fit and remove
the baffle plate. Do this several times before using the fireplace
for the first time.
1. Swivel the two holding catches in towards the hearth.
2. Lower the rear part of the baffle.
3. Take the baffle out of the hearth.
4. Fit the baffle back into the hearth.
5. Use the holding catches to lock the baffle to the hearth.

FLUE CONNECTION

Remove the baffle. On the inside of the insert, connect the collar
on the appliance to the flue pipe. Reattach the baffle to the
hearth.
FILLING IN THE GAPS AROUND THE INSERT
The space between the fireplace opening and the hearth may be
blocked. To protect it, remove the door and frame from the
hearth.
Depending on the style and type of stone, the space can
be closed by using stones or firebricks between the hearth
insert and the fireplace, with prefabricated refractory
materials and then sealed on site, or with refractory
panels (M0 class) cut to size.
Use ready-to-use refractory mortar or 2/3 sand and 1/3
refractory cement for the brick work.
After filling in the gaps around the insert, refit the frame and put
the door back on the hearth.
CAUTION. When installing an insert, distribution of hot
air through ducts is prohibited. Do not take the caps off
the casing cover.