Replacing the filter bag
Insert a new filter bag if the old one is damaged. Obey the steps of the following figure.
Helpful hints
•
Unplug the plug after use. However, do not plug it out with your hands being wet.
•
The cleaning robot should not touch de pool walls when you take it out of the water to avoid that
the surface of the pool be scratched or the robot be damaged.
•
Before taking the robot out and placing it on the edge of the pool, hold it above the water surface
during approx. 10–15 s to allow the water remaining inside the casing to drain off.
•
Hold the robot at the handle to take it out of the pool.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 63229
Page 14
09 2021-1