Advertisement
Sloped pool
Pool distance
Depending on pool size
Note!
The above-mentioned values are recommendations. The user must adapt the suitable nozzle
orientation considering the above-mentioned procedure and the actual pool.
Placing the cleaning robot into the water
1. With one hand, hold the cable, making sure that there is enough cable between your hand and
the robot that the device can plunge into the water without however touching the floor. With the
other hand, hold the handle of the cleaning robot and slowly place the device into the water.
2. Hold the cable until the robot has filled itself with water and begins to sink towards the floor.
3. By obeying the above procedure, you will avoid that the cleaning robot tip over.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Figures
Item 63229
Page 11
09 2021-1
Advertisement
