Advertisement
Quick Links
Instruction Manual
Pool Cleaning Robot
Naia HJ1009
63229
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Summary of Contents for WilTec Naia HJ1009
- Page 1 Instruction Manual Pool Cleaning Robot Naia HJ1009 63229 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 • Store the cleaning robot on a flat surface. No hard objects must touch the casing of the robot to avoid damage. © by WilTec Wildanger Technik GmbH Item 63229 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 Do not apply excessive force on the filter unit by squeezing or seizing it when you mount or unmount it to avoid that the casing be damaged. • Do not lift both sides of the filter unit at the same time. © by WilTec Wildanger Technik GmbH Item 63229 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 Assembly and installation © by WilTec Wildanger Technik GmbH Item 63229 Page 5 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 6 Plug the cable into the socket of the power-supply unit (Attention! Make sure that the plug is correctly oriented!) and screw both nuts on either side of the plug to tighten them. Then plug in the plug to the mains. © by WilTec Wildanger Technik GmbH Item 63229 Page 6 http://www.WilTec.de...
- Page 7 AUTO RUN Cleaning robot is working au- Automatic operation button (automatic operation) tomatically. Operational time display for auto- matic operation Pool width display © by WilTec Wildanger Technik GmbH Item 63229 Page 7 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 8 The user can select the appropriate nozzle orientation for different pool types, e.g., a low speed with a large radius of movement, by setting the circle symbol 〇 to the 45° position (movement to the left) or 75° position (movement to the right). © by WilTec Wildanger Technik GmbH Item 63229 Page 8 http://www.WilTec.de...
- Page 9 You can adapt the nozzle orientation to reduce the moving curve ; however, that means that the cable will be twist more often. Recommended nozzle orientation Direction of higher speed Pool distance Figures © by WilTec Wildanger Technik GmbH Item 63229 Page 9 http://www.WilTec.de http://www.aoyue.eu 09 2021-1...
- Page 10 Direction of lower speed Pool distance Figures © by WilTec Wildanger Technik GmbH Item 63229 Page 10 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 11 2. Hold the cable until the robot has filled itself with water and begins to sink towards the floor. 3. By obeying the above procedure, you will avoid that the cleaning robot tip over. © by WilTec Wildanger Technik GmbH Item 63229 Page 11 http://www.WilTec.de...
- Page 12 Taking out the bag 1. Open the retaining ring and the robot. 2. On one side, press down the bracket and lift the filter unit. 3. Remove the filter unit. © by WilTec Wildanger Technik GmbH Item 63229 Page 12 http://www.WilTec.de http://www.aoyue.eu...
- Page 13 4. Open the small bracket and take out the filter bag for cleaning. Reinstall Reinstall the filter unit. Insert one side of the filter cartridge into the bracket. Press down the bracket on the opposite and correctly place the filter unit. © by WilTec Wildanger Technik GmbH Item 63229 Page 13 http://www.WilTec.de http://www.aoyue.eu...
- Page 14 10–15 s to allow the water remaining inside the casing to drain off. • Hold the robot at the handle to take it out of the pool. © by WilTec Wildanger Technik GmbH Item 63229 Page 14 http://www.WilTec.de http://www.aoyue.eu...
- Page 15 4. Switch off filter system of the pool. 5. Cable too short 5. Unwind cable further. Cleaning robot does not Bad connection of mains cable/plug. Correctly plug in mains ca- ble/plug. © by WilTec Wildanger Technik GmbH Item 63229 Page 15 http://www.WilTec.de http://www.aoyue.eu 09 2021-1 http://www.teichtip.de...
- Page 16 German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.