Table of Contents
Advertisement
Troubleshooting
If a fault occurs, first check the list below before taking the radio for repair. If you
cannot solve a problem, please contact TEAC at 1300 553 315.
WARNING: DO NOT try to repair the unit yourself, as this will void the warranty.
PROBLEM
No Sound
The buttons on the unit are not
responding
Poor radio reception
No DAB signal/reception.
DAB reception cuts in and out
Specifications
Radio Type
Frequency Range
Battery Operation
Power Supply
Max Power
Consumption
Unit dimensions
Unit weight
*Dimensions and weight are approximate
*Specifications are subject to change without notice
POSSIBLE CAUSE
Headphones may be connected.
The Volume might be set to low.
The power cord may not be
connected correctly/firmly
Electrostatic discharge or interference
from other electrical equipment
There is a weak aerial signal or
there may be interference from other
electrical equipment
You may not have DAB in your area
DAB+ / FM / AM Digital Radio
DAB Band III, 174 - 240 MHz
FM 88 - 108 MHz
AM 540 - 1600 KHz
6 x 1.5v C Size batteries (not included)
AC Power Input: 230-240V, 50Hz
11W
11
SOLUTION
Disconnect your Headphones from the
unit.
Adjust the volume level of the radio.
Reconnect the power cord firmly
Turn the unit off and disconnect the
Power Cord. Wait for 5 - 10 seconds,
reconnect and turn the unit back on
Reposition the aerial and the unit for
the best possible reception. Ensure the
aerial is connected.
Keep the unit away from other
electrical equipment where possible.
Rotate antenna and rescan channels.
Move the radio to a position with better
reception.
Visit www.digitalradioplus.com.au to
find out if you have DAB in your area
Advertisement
Table of Contents
