Beta Layout Reflow Instruction Manual page 14

reflowpwr Reflow capacity [0 to 100 %]
reflowpwr <ENTER> indicates the current value.
reflowpwr 100<ENTER> the oven heats to 100% capacity.
dwelltemp Temperature of the retaining phase [0 to 254 degrees]
dwelltemp<ENTER> indicates the current value. dwelltemp
232<ENTER> the temperature adjusts to 232°C. This
temperature is normally equal to the Reflow temperature.
dwelltime Duration of the retaining phase [0 to 254 sec].
dwelltime<ENTER> indicates the current value.
dwelltime 40<ENTER> adjusts duration to 40 seconds.
dwellpwr Capacity of the retaining phase [0 to 100% ]
dwellpwr<ENTER> indicates the current value.
dwellpwr 100<ENTER> the oven operates at 100% capacity.
tempoffset Temperature sensor adjustment [- 30 to 30degrees].
tempoffset<ENTER> indicates the current value in °C.
tempoffset -3<ENTER> the measured temperature is reduced
by 3°C. 3 degrees less are indicated.
tempoffset 5<ENTER> the measured temperature is
increased by 5°C. 5 degrees more are indicated.
Instruction Manual
Reflow-Controller
Page 12 of 14